Válvula solenoide de 220 V y 1/2 pulgada, normalmente cerrada, para gas, aire, aceite y agua

General Description

This 220V solenoid valve (normally closed) is used to control the flow of gas, air, oil, and water. It is manufactured with a high-quality housing that can withstand pressures up to 0.7 MPa and high temperatures. Installation is recommended for indoor, horizontal, and dry environments.

Technical Data

• Maximum Pressure: 0.7 MPa
• Internal Thread Diameter: 20 mm
• Flow Diameter: 16 mm
• Coil Power: 36 W
• Recommended Start-up Time: Less than 60 minutes

Operating Environment

• Installation: Indoor, horizontal
• Conditions: Dry environment
• Protection: When used outdoors, protect the coil from water.

Application

• Use with piping in non-corrosive applications
• Suitable for water, air, gas, and low-viscosity liquids.

Further Information

• Dimensions are measured manually; A deviation of 1 to 3 cm is possible. Color variations may occur due to differences in lighting conditions and screen settings.