Mophorn prensa hidráulica de taller, prensa neumática de 20 T con bastidor en H y placa de prensado. Prensa ajustable estable con soporte triangular para doblar, enderezar y estampar en el garaje.

• 1. Triangular Base Reinforcement: Upgraded with a triangular brace, the structure enhances base stability. Combined with the H-shaped frame, it remains steady during component fastening.
  
• 2. Heavy-Duty Construction: Built with thickened steel, it offers enhanced weight-bearing capacity and durability. The large-diameter pressure column minimizes slipping.
  
• 3. 20 Ton Strong Load Capacity: Helps easily disassemble and install automotive parts and handle metal tasks. Suitable for professionals and DIY enthusiasts.
  
• 4. Hydraulic and Pneumatic: Equipped with a pneumatic assist pump and quick connector for easy attachment to an air compressor. Smooth and efficient operation.
  
• 5. Adjustable Height: The worktable has a quick-adjust pin system with 9 height settings. Cylinder stroke is 5.5 inches. Note: Exceeding the range may damage cylinder seals.

Acero engrosado

Construido con un marco de acero grueso para una fuerte capacidad de carga y resistencia a la deformación.

Base estable

Estable y resistente a las vibraciones bajo presión.

Construcción duradera

Con una superficie recubierta de polvo para mayor durabilidad y resistencia a la corrosión..

Columna antideslizante

La columna descendente de alta resistencia garantiza un uso a largo plazo sin resbalones ni deformaciones.

Placas móviles

Dos placas móviles para la fijación flexible de piezas de diferentes tamaños.

Seguro de calidad

Durable y resistente para un rendimiento confiable.

Especificación

• Rated Load: 20T
  
• Product Dimensions: 30.2 × 23.6 × 69.8 in/770×596×1770 mm
  
• Item Model Number: ZX0901 item 20T
  
• Hydraulic Oil Model: 15#
  
• Cylinder Stroke: 5.7 in/145 mm
  
• Net Weight: 190.5 lbs/86.35kg(Include all accessories)
  
• Hydraulic Pump Operating Pressure: 0.8-1.2 MPa/li>

Contenido del Paquete Incluido

• 1 x Pneumatic Quick Connect Hose (European-style)
  
• 1 x User Manual
  
• 1 x European-style Quick Connect Fitting
  
• 1 x Pneumatic Manual Pump Component
  
• 1 x Handle
  
• 1 x 20T Pressure Gauge
  
• 1 x Nylon Washer
  
• 1 x Oil Cylinder Component
  
• 1 x Tapered End Tightening Screw M8×8
  
• 1 x Upper Cap
  
• 1 x Piston
  
• 1 x Lower Cap
  
• 2 x Vertical Column
  
• 2 x Cross Beam
  
• 2 x Channel Steel Workbench
  
• 2 x Pressure Block
  
• 2 x Angle Iron
  
• 2 x Cotter Pin
  
• 4 x Workbench Support Pipe
  
• 4 x Diagonal Brace
  
• 4 x Hex Bolt M8×16
  
• 8 x Hex Bolt M16×35
  
• 8 x Flat Washer φ16
  
• 8 x Spring Washer φ16
  
• 8 x Hex Nut M16
  
• 15 x Flat Washer φ10
  
• 15 x Spring Washer φ10
  
• 12 x Hex Nut M10
  
• 4 x Hex Bolt M10×130
  
• 8 x Hex Bolt M10×25
  
• 4 x Hex Bolt M12×30
  
• 4 x Flat Washer φ12
  
• 4 x Spring Washer φ12
  
• 4 x Hex Nut M12
  
• 3 x Hex Bolt M10×20