Altivar Process ATV600 - Variador de velocidad ATV630 - 45 kW/60 HP - 380...480 V - IP21/UL Tipo 1 - ATV630D45N4

ComplementarioDesign of frequency changer : U converterFrecuencia de red : 50...60 HzAmbient air transport temperature : -40...70 °CRelative symmetric mains voltage tolerance : 10 %Maximum output voltage : 480,0 VRelative symmetric network frequency tolerance : 5 %Maximum acceleration under shock impact (during operation) : 150 m/s² at 11 msPermitted relative humidity (during operation) : Class 3K5 according to EN 60721-3Maximum acceleration under vibrational stress (during operation) : 10 m/s² at 13...200 HzPotencia nominal de salida : 45,0 kW4 quadrant operation possible : FalsePermitted relative humidity (during transport) : Class 2K5 according to EN 60721-3Permitted relative humidity (during storage) : Class 1K5 according to EN 60721-3Capacity of DC link : 3000,0 µFMaximum deflection under vibratory load (during operation) : 1.5 mm at 2...13 HzOperating element present : TrueNumber of HW interfaces serial TTY : 0Power loss per device current dependent : 1210,0 WPower loss static current independent : 31,0 WNumber of output phases : 3Maximum acceleration under vibratory load (during transport) : 10 m/s² at 13...200 HzNumber of input phases : 3Number of inputs, potential-free : 0Maximum deflection under vibratory load (during transport) : 1.5 mm at 2...13 HzBrake chopper integrated : FalseMaximum acceleration under shock load (during transport) : 150 m/s² at 11 msNumber of HW interfaces USB : 0Number of HW interfaces other : 0Optical interface present : FalseComputer port : TrueSupporting protocol for TCP/IP : TrueApplication in industrial area permitted : TrueApplication in domestic and commercial area permitted : FalseSupporting protocol for PROFIBUS : TrueNumber of HW interfaces industrial Ethernet : 1Number of inputs, bidirectional, not potential-free : 01 phase low current possible : FalseNumber of HW interfaces parallel : 0Supporting protocol for KNX : FalseSupporting protocol for ASI : FalseNumber of HW interfaces PROFINET : 0Supporting protocol for CAN : TrueSupporting protocol for INTERBUS : FalseSupporting protocol for DeviceNet : FalseSupporting protocol for SUCONET : FalseSupporting protocol for LON : FalseSupporting protocol for MODBUS : TrueSupporting protocol for Data-Highway : FalseSupporting protocol for PROFINET IO : TrueSupporting protocol for PROFINET CBA : TrueMaximum acceleration under shock load (during storage) : 150 m/s² at 11 msSupporting protocol for Foundation Fieldbus : FalseSupporting protocol for SERCOS : FalseMaximum deflection under vibratory load (during storage) : 1.5 mm at 2...13 HzSupporting protocol for DeviceNet Safety : FalseSupporting protocol for INTERBUS-Safety : FalseSupporting protocol for PROFIsafe : FalseSupporting protocol for EtherNet/IP : TrueSupporting protocol for AS-Interface Safety at Work : FalseMaximum acceleration under vibratory load (during storage) : 10 m/s² at 13...200 HzWith safety function Safe torque off (STO) : TrueWith sft fct Safe Stop 2 (SS2) : FalseWith safety function Safe Stop 1 (SS1) : FalseSupporting protocol for SafetyBUS P : FalseSupporting protocol for BACnet : FalseSupporting protocol for other bus systems : FalseCorriente nominal de salida : 88,0 AWith safety function Safe brake management (SBC/SBT) : FalseWith safety function Safe Operating Stop (SOS) : FalseWith safety function Safely Limited Position (SLP) : FalseWith safety function Safely Limited Speed (SLS) : FalseWith safety function Safe Speed Monitor (SSM) : FalseWith safety function Safe Direction (SDI) : FalseBase load current at high overload : 74,5 ABase load current at low overload : 88,0 ANumber of HW interfaces serial RS232 : 0With safety function Safe programmable logic : FalseWith safety function Safe Position (SP) : FalseEMC limit value (complied) : TrueEnvironmental class (during transport) : Class 2C3 according to EN 60721-3-2Class 2S1 according to EN 60721-3-2Environmental class (during operation) : Class 3C3 according to IEC 60721-3-3Class 3S3 according to IEC 60721-3-3Environmental class (during storage) : Class 1C3 according to EN 60721-3-1Class 1S2 according to EN 60721-3-1Number of HW interfaces serial RS422 : 0Number of HW interfaces serial RS485 : 1Tipo de montaje : Montaje en paredNúmero de fases de la red : 3 fasesnúmero de salida digital : 0salida discreta : Salidas relé R1A, R1B, R1C 250 V CA 3000 mASalidas relé R1A, R1B, R1C 30 V CC 3000 mASalidas relé R2A, R2C 250 V CA 5000 mASalidas relé R2A, R2C 30 V CC 5000 mASalidas relé R3A, R3C 250 V CA 5000 mASalidas relé R3A, R3C 30 V CC 5000 mATensión de salida :