21V Cordless Drill Driver with 2 x 1.3Ah Batteries, 55Nm, 21+1 Torque Settings, 2 Speeds, LED Lights, DIY Drill Driver for Home Use

General Description

This 21V cordless drill/driver is a 2-in-1 power tool that combines the functions of a screwdriver and a drill, offering exceptional versatility. It allows you to quickly tighten or loosen screws and drill holes in various materials, providing ample power for most household or industrial tasks. Made of engineering plastic, it features a sleek design with an ergonomic, non-slip handle that is easy to grip and comfortable. Equipped with high-quality metal bearings, it ensures high precision and stability. The brushless motor offers high speed and a long lifespan, with a maximum torque of 55Nm and two speed settings. Technical Specifications Type: 2-in-1 Power Tool (Electric Screwdriver + Drill) Voltage: 21V Battery Capacity: 1300mAh (2 batteries included) Maximum Torque: 55Nm Material: Plastic Product Dimensions (Motor): 165 * 64 * 199 mm / 6.50 * 2.52 * 7.83 inches Product Dimensions (with Batteries Installed): 165 * 80 * 223 mm / 6.50 * 3.15 * 8.78 inches Product Weight (Motor): 845g / 1.86 lbs Product Weight (with 2 Batteries): 1462g / 3.22 lbs Package Dimensions: 205 * 195 * 66 mm / 8.07 * 7.68 * 2.60 inches Package Weight (Motor): 928g / 2.05 lbs Package Weight (with 2 Batteries) Batteries): 1545g / 3.41 lbs. Compatibility and Accessories: Suitable for tightening screws in all household scenarios (building renovation, appliance installation, furniture assembly and repair, woodworking) and other disassembly tasks. Can also be used for drilling holes in various materials: wood, metal, stone, concrete. Accessories included: 1 * 2-in-1 Power Tool, 2 * Batteries, 1 * Battery Adapter. Installation: Battery Installation: Insert the battery into the power tool until it clicks into place. Operation: Tightening/Loosening Screws: Select the direction of rotation (forward to tighten, reverse to loosen) using the switch. Adjust the speed mode (paddle or trigger) according to the desired speed. Press the trigger to start the tool and work on the screw. Drilling Holes: Insert the appropriate drill bit into the tool's chuck. Select the direction of rotation (forward). Adjust the speed setting according to the material being drilled. Press the trigger and drill the hole gently. Using the LED light: The LED light automatically illuminates the work area when the trigger is pressed. Cleaning and storage: After use, switch off the tool, remove the battery, clean the tool of any chips, and store it in a dry place. Safety tip: Use the switch lock mechanism before changing bits or making adjustments. Wear safety glasses when using the hammer drill. Bit/milling cutter selection: Use the appropriate screwdriver bit or milling cutter for the task and material. Maintenance: Regularly check the battery status and recharge it as needed. Keep the tool clean to prolong its lifespan.