TPMS Universal Car Pressure Monitor Sensor Reset Tool

1. The tire pressure sensor on models from 2012 onwards can only be read with certain specified diagnostic tools.

2. Before the tire pressure monitoring system functions correctly, the body control module will store the identification information for each position in the tire pressure sensor. 3. This can help you reprogram all tires much more easily in just 3 steps. 4. The tire pressure monitoring sensor activation tool is simple, quick, and easy to use. 5. The compact design makes it lightweight and portable, easy to carry.

Specification:

Condition: 100% Brand New Item Type: Tire Pressure Reset Tool

Color: As shown in the picture Battery: 9 battery numbers (not included) Hardware Version: OEC-T5 Software Version: EL-50448 Voltage: 9V Compatibility: Suitable for universal cars Application Procedure: Step 1 - Enter Tilt Mode Place the gear selector in "P" Turn the ignition switch to "ON" Enter the tire pressure display interface via DIC DIC displays "Press Set/Ctrl to relearn" Press "Set/Ctrl" The turn signal will flash for 3 seconds and the horn will sound twice to enter learning mode Step 2 - Read Tire Pressure Sensor Information Starting with the front left wheel, Position the J-46079 or EL-50448 diagnostic tool antenna against the valve stem and near the tire sidewall margin. The EL-50448 tire pressure tool starts with the start switch. Successful reading of the Tire pressure sensor information is displayed when the horn beeps once (tap 3). The same method is used to read other tire pressure information. Follow the instructions above to read the tire pressure of the front right, rear right, and rear left wheels. The turn signals will flash for 3 seconds and the horn will beep twice when the learning process is complete. Package List: 1 x Tire Pressure Reset Tool Note: The package does not include the charger and battery.