Juego de herramientas para alternador de 29 piezas, que incluye un juego de llaves para alternador, un embrague unidireccional para alternador y una herramienta para desmontar la polea.

Used for installing and removing idler pulleys when replacing alternators or pulleys. The pulley is secured in place by the included 33-tooth insert. This allows you to loosen and tighten the center nut while holding the pulley shaft. Hex wrenches (hex-driven): H8, H10; Hex wrenches (hex-driven): M8, M10; Star wrenches: T40, T50. The alternator removal kit is compatible with most vehicle models, such as Audi, BMW, Fiat, Ford, Mercedes-Benz, Opel, Renault, Peugeot, SEAT, Volvo, and Volkswagen. The tool kit includes: a 12.5 mm 1/2 inch alternator bit set, a flywheel assembly combination wrench, a pulley holder with 33 bits, 8 mm and 10 mm internal hex screwdriver bits, M8 and M10 multi-tooth bits, T40 and T50 T-type bits (hex drive, round shank), two T50 and M10 fixed bits (with 33-tooth fixed inserts), a 1/2 inch 110 mm long shaft, one Bosch alternator insert, one Reynolds alternator insert, and a 1/2 inch x 10 mm bit adapter. Technical Specifications: 1 H8 hex socket bit, 75 mm long; 1 H10 hex socket bit, 75 mm long; 1 M8 XZN multi-tooth bit, 75 mm long; 1 M10 XZN multi-tooth screwdriver bit, 75 mm long; 1 T40 Torx screwdriver bit, 75 mm long; 1 T50 Torx screwdriver bit, 75 mm long; 1 M10 XZN screwdriver bit, 64 mm long; 1 T50 fixed screwdriver bit (with fixed teeth), 70 mm long; 1 M8 screwdriver bit, 70 mm long; 1 H10 screwdriver bit, 50 mm long; 1 T40 screwdriver bit, 50 mm long; 21 1 piece for 35 cm and 1 piece for 1/2 inch H10 screwdriver bit; 1 piece for 4-pin 30 mm dedicated adapter, 30 mm long; 1 piece for 17 x 19 mm hex adapter, 30 mm long; 1 piece for 17 x 21 mm hex adapter, 30 mm long; 1 piece for 28 x 19 mm hex adapter, 30 mm long. Size: 22 mm. Hexagonal, 30 mm long - 1 adapter 28 x 22 mm; Hexagonal, 34 mm long - 1; 1/2 inch square wrench M10, 140 mm long - 1; 1/2 inch square wrench M10, 110 mm long - 1; 1/2 inch Torx T50, 110 mm long - 1; Type 33 brace, 15 x 19.3 mm, 30 mm long - 1; Type 33 brace, 17 x 19.3 mm, 30 mm long - 1; Type 33 brace with 1 22 x 19.3 mm dental insert, 30 mm long - 1; H17, 30 mm long - 1; 3-pin 27.5 mm, special hexagonal adapter 3-pin, 17 mm long