Automatic Watering Stakes Watering System, Automatic Plant Drip Irrigation Slow Release for Indoor or Outdoor Plants (Pack of 16)

Useful tool: when you are on vacation, business trip or forget to water plants, the automatic watering probe is a simple and effective way to water plants; Remember to follow the steps of use
Application: the set of 16 garden stakes are suitable for most automatic garden watering devices; They are good for sowing, planting without pollution; And they will slow to release water in the pot according to the needs of plants
Measurement: the connection tube is 78 cm long, the root receives water directly by itself to achieve water drip irrigation
Reminder: the watering heap is suitable for watering any indoor plant; to accelerate the water flow, lift the pot; to slow the water flow, lower it; Please note that loosening soil, water absorption and tank water level affect the infiltration; the higher the water level in the tank, the faster the infiltration. Please adjust the water level according to your actual use to get satisfactory results
Use: 1. Soak the cone and ceramic tube in water for 15 minutes, then fill the ceramic cone with water. 2. Fill the hose with water and drain the air from the hose. 3. Under water, tighten the top and insert the ceramic cone into the ground. 4. Put the water pipe into the water bottle, which should be higher than the potted plant. 5. Check that the water flows into the ceramic cone into the pipe