Burlete autoadhesivo de goma para la parte inferior de la puerta, de 100 x 5 cm, con aislamiento térmico para la entrada, color blanco.

Multifunctional draft stopper for doors: A draft stopper with cold insulation effectively blocks airflow, prevents wind and heat loss in winter, and ensures optimal cool air in the home in summer for an ideal room temperature. The self-adhesive draft stopper also blocks light, keeps out dust, insects, etc., and acts as a sound absorber to some extent. Ideal for insulating the front door seal. Groove and triple design: The bottom of the door features a three-layer hollow construction to ensure that force is distributed evenly when the bottom of the door seal rubs against the floor. Additionally, the insulating draft stopper has a 1 mm groove in the center that can be folded over. This facilitates opening and closing the door, reduces friction, and extends its lifespan. High-quality material: The insulating door seal is made of silicone, which is soft and elastic, with high wear resistance and anti-aging properties. Compared to other door seals, the grooved and hollow construction ensures that our door seal has less friction with the floor and absorbs forces evenly without deforming, making use easier and more convenient. Good adhesion: The door seal has a self-adhesive backing with a 2 cm wide adhesive layer, which adheres firmly to the bottom of the door and does not come loose easily. The door seal seals gaps of 0 to 3 cm and is suitable for all types of doors. Please note that the door seal must protrude slightly above the floor during installation. Wide application: The door seal can be installed on doors made of various materials, including wooden doors, metal doors, glass doors, etc. Whether it is a sliding door, bedroom door, or front door, wind, light, and air circulation can block insects and prevent them from entering your home. Easy to install: The cold-insulating draft stopper is very easy to use. Clean the door surface, cut to the correct length, remove the adhesive, and stick the seal under the door. Ensure that the adhesive adheres well to the door surface. Allow the glue to dry for 12 hours for best results. NOTE: For optimal performance, it is best to heat the glue with a hairdryer before applying it.